Press park, component range, manufacturing depth. The technological basis for defense supply chains in stainless steel, duplex and special alloys.
Eight hydraulic presses with a total range of 150 to 1,500 tonnes press force. Designed for cold and hot forming of thick-walled components in high-alloy materials.
| Press Type | Tonnage | Units |
|---|---|---|
| Two-way press | 150 / 250 / 350 / 1,500 t | 4 |
| Single-way press | 200 / 400 t | 2 |
| Double-acting press (top/bottom) | 1,500 t total | 1 |
| Hydroforming line | for tee production | 1 |
| Max nominal diameter | DN 600 |
| Max wall thickness | 100 mm |
| Max single part weight | 1,000 kg |
| Minimum batch size | Single part / prototype |
| Component types | Elbows, tees, Y-fittings, reducers, flanges, custom formed parts, pressure vessel components |
Presses with graduated tonnage allow optimal tool and process selection per component requirement. Hydroforming for complex hollow geometries.
Solution annealing, tempering, stress relief annealing under controlled atmosphere. Material properties per specification, documented process parameters.
Sawing, turning, milling for final geometry and weld preparation. Sandblasting and pickling for surface-critical stainless steel applications.
| Material certificates | EN 10204 3.1 / 3.2 as standard |
| Traceability | Complete from raw material to finished part |
| Non-destructive testing | UT, RT, PT, MT via qualified partners |
| First article inspection | FAI reports and initial sample inspections per customer requirements |
| Dimensional control | Geometric inspection in-house |